Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

just went out and checked my 250 hour 4410
its got the hibernator with 6 tall caps
and its definatly needs cleaning
I'm going to have to watch it

Check and clean your battery compartment after each use
John Deere Tractors
Replies 29 Post by junkman 8556

IM in NE kansas we got a half inch of ice last weekend<br>
coverd with 6 in of snow and its been bitter cold and we<br>
load /unload freight trucks outside everyday at my workplace<br>
On the ice the forktrucks proved useless and with<br>
no tirechains on the shops tractor even cleaning the snow<br>
off the ice wasnt very effective<br>
Tuesday I went home bundeled up and drove my 4410 in 5 miles to work I even had to cut across a feild because the<br>
snow drifts were to deep to buck<br>
I started off with the fork lift attachment on the 430 loader loading trucks ,it worked great.<br>
The ehydro is much smoother and easier to operate then our<br>
best yale forklift and the loader controls (joystick)works<br>
pefectly. It handles the pallets with great ease and makes working on ice efortless. The key is the ehydro once you<br>
have it adjusted properly it never spins or slides a tire.<br>
this makes the job fast and safe<br>
Next I used the rear blade to clear the snow. " the<br>
ehydro rules" the controls which i consdered all backwards<br>
quickly become second nature with the loadmatch turned<br>
on there was nearly no traction loss and no lost motion<br>
the brakes steering and hydrulics are smooth and effortless<br>
if it wasnt for the crappy tilt wheel this thing would'nt seem real. <br>
we put 15 hours on it in 2 days running in 0 degree weather and must of changed from a bucket to forks and back 20 times its fast and easy.<br>
I probily hooked up and un hooked the rear blade 10 times (its got Imatch so you usually never leave the tractor seat)<br>
and moved a lot of freight ,snow and ice<br>
I am no longer in shock about buying a high priced lawnmower ,I now wonder how they squeased that big of tractor in that small of package and sell it that cheap<br>
<br>

GOT TO USE 4410 FOR FIRST TIME
John Deere Tractors
Replies 3 Post by junkman 8556

After asking lots of questions and with the very valuable <br>
advice of many of you members i had chosen to buy a 6ft<br>
box blade and hyd top link for my 4410 ehydro I had decided <br>
to buy the king kutter as its cheap should do the job well<br>
and is what shoud be the right size 5 1/2-6ft wide .<br>
This plan was set in stone till I went to pick it up.<br>
the last one on the lot was scuffed up faded out and no discount was offered and no new ones were to be ordered till<br>
the last one was sold,bad plan!!<br>
This set me back to shopping I looked at bush hog blades<br>
they are heavier have all kinds of options but are quite<br>
a bit higher. then the dealer showed me a roll over blade<br>
I could see imediatly this was the ticket. forget the the<br>
hyd top link ( I hope)and retracting scarifers or swinging<br>
back blade and not really to expensive <br>
I ordered a 65 inch wide 700lb RO650 bushhog for 1125.00<br>
delivered and set up he wouldhave knocked off another<br>
100.00 if I gave him 60 days to get it in with his regular<br>
order of equipment. I should have it 2 weeks Ill get<br>
pictures and let everybody know how it works<br>
<br>
<br>

I ordered a rollover box blade
Operating and Attachments
Replies 3 Post by junkman 8556

The hyd. top link looks like a good Idea .In just looking
at this implement and having never used one I'm thinking
that top link adjustment is a big part of how it works
and a hyd. top link would really work slick
Top and tilt as deere calls it would be better but that
opens a whole new can of worms.
I have a single rear set of coulplers so I'm set up
and ready. I know I have seen surpluss cylinders with
the swivels on them allready about the right size.
looks like a fun challange the search is on!!

what size boxblade for 4410 deere
John Deere Tractors
Replies 19 Post by junkman 8556